2015 Roundup
Take a look back at some of our most celebrated and viewed content of 2015. For more posts, pictures, videos...
Month: December 2015
Tricks of the Trade – Get the most from your drill bits
Welcome to our new Tricks of the Trade series, a collection of insightful hints used by the trade to help...
SDS Drills
Introduction This new type of power tool was introduced in the mid 70’s by Bosch and was called the SDS+...
Top Tips (Video) – Coloured dots
Glueing up any sort of project can be a nail biting and pretty fraught experience, not least of which is...
Ten Turners Turning: Introducing Mark Sanger
The second turner to introduce from our the Ten Turners Turning line-up is Mark Sanger. Here’s some info about Mark…...
How to make a Windsor Chair step-by-step: Part 3
After completing all of our legs, stretchers and arm supports in Part 1 and your seat in Part 2 it’s...
Top Tips (Video) – Making a Centre Line
Here’s a useful little gadget for making a centre line down the edge of a board. You could use an...
Ten Turners Turning: introducing Richard Findley
As we approach our Ten Turners Turning event at the Nuneaton store on Friday 11 and Saturday 12 March 2016,...
An Introduction to Veneering
Stroll into any of the big DIY supermarkets, wander down to the timber section and no doubt you’ll be met...
Top Tips (Video) – Using a Marking Gauge
One of the most difficult tools for the newcomer to master is the marking gauge, but with a little practice,...
Ten Turners Turning – 2016
Ten Turners Turning is back at Nuneaton in March 2016!! This event promises to be action packed with all things...
Evolution APF10 Powered Respirator
Along with all the other social media platforms, YouTube is one I occasionally dip into, being particularly valuable for visual...